Home > News > Content

Product Categories

CONTACT US
Add: No.215, Xianghe District, Songmushan Village, Dalang Town, Dongguan City, Guangdong Province
M.B: +86-13929487727
Tel: +86-769-82221773
Fax: +86-769-81125961
E-mail: alanyang@yd-atool.com
Die - Casting Molds
Nov 05, 2018

Die - casting molds consist of two parts, the covering part and the moving part respectively. In hot chamber die - casting, the cover part has gate, while in cold chamber die - casting is injection port. Molten metal can enter the mold from here, and the shape of the site matches the shape of the injection nozzle in hot chamber die casting or the injection chamber in cold chamber die casting. The moving part usually includes a push rod and a runner. The runner is the channel between the gate and the cavity through which molten metal enters the cavity. The covering part is usually connected to a fixed platen or front platen, while the movable part is connected to a movable platen. The cavity is divided into two cavity insert blocks, which are independent parts that can be removed or installed relatively easily through bolts.

Quick Navigation
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Newsletter
    Enter in your email address to receive deals and coupons.
    +86-769-82221773
    +86-769-81125961
    alanyang@yd-atool.com